Mairodi Training | Training & Consulting Center

ADVANCED OIL AND GAS PRODUCTION SYSTEM

admin — Wed, 18 Aug 2010 03:58:19 +0000

Date	:	11 - 14 October 2010
Duration	:	4 Days
Venue	:	Bandung(Hotel Grand Seriti)
Investation Fee	:	IDR 7.250.000

REGISTER ONLINE NOW

Training Syllabus:

“ADVANCED OIL AND GAS PRODUCTION SYSTEM”

TRAINING INTRODUCTION :

The rapidly increasing worldwide demand for natural gas as an energy source requires expertise in gas engineering technology. Incorporating a balance between theory and application, course emphasis is on training participants for immediate application of acquired techniques to field problems.

Production is defined as the operations involved in bringing well fluids to the surface and preparing the fluids for transport to a refinery via pipelines or trucks. The first step in production is to start the well fluids flowing to the surface (called “well completion”). Well servicing and workover consists of performing routine maintenance operations (such replacing worn or malfunctioning equipment) and performing more extensive repairs, respectively. Well servicing and workover are an intermittent step and necessary to maintain the flow of oil and gas. Next, the fluid must be separated into its components of oil, gas, and water; stored; and treated (for purification), measured, and tested before being transported to the refinery.

This training will provide the principle and yet some practical and theoretical aspect that can be applied on daily work faced by production engineers and supervisor in the oil industry.

SUBJECT LEARNED :

All aspects of completions are covered in sufficient detail to permit participants to review his/her current practices
The fundamental concepts of production operations and their proper application in the field
Production equipment such as wellhead, tubing and packers, well completions and workover as well as well test and problems, production logging and cementing will also covered
Production logs and how and when to use them; evaluation techniques for cement bond logs and pulse echo tools

TRAINING BENEFITS :

Learn how to plan and implement well completions, workovers, stimulation treatments, and routine production operations with an efficiency that increases profits
Learn about the role of rock mechanics in completions, stimulation, and workovers
Be able to give suggest or discover the procedures and techniques that increase production and cut operating costs
Be Able to identify and implement production improvement opportunities that can be carried out by either rig or non-rig well interventions
Implementation of appropriate technology, either from internal or external sources, in well design, whilst ensuring that the well value is maximised

TRAINING MATERIAL OUTLINE :

1. GEOLOGICAL CONSIDERATION

Formation Rock
Primary and Secondary Migrations
Reservoir Traps

2. RESERVOIR FUNDAMENTALS THEORY

The Nature of Rocks and Fluids
Porosity and Permeability
Productivity Index
Volumetric Calculation
Other Calculations and Decline Curves

3. FLUID FLOW

Well Productivity
Choke and Reservoir Fluids
Inflow and Outflow

4. PRODUCTION OPERATIONS

Well head and Well Head Equipment
Multiple Orifice
Routine Operations
Opening and Shut-in Well Procedure

5. WELL TESTING AND SATELLITE SYSTEM

Test Separator Operations and Equipments
Gas Systems Instruments
Flare System and Depressurising
Pigging Techniques and Procedures
Sampling and Analysis
BS & W and API Gravity Measurement
Protective Steam Tracing

6. SURFACE PRODUCTION OPERATIONS

Process, Level, Temperature and Pressure Controls
Oil treating , Heater treater and Dehydrator
Separators, Stage Separators and Sizing
Two-phase and Three-phase Separation
Skimmer tank and Flotation unit

7. WELL PROBLEMS

Low Production and Formation Damage
Low Reservoir
Plug-in Tubing or Perforations
High Viscosity
High Back Pressure
Inadequate Artificial Lift
Water Production and Mechanical Problem
Protective Steam Tracing

8. PRODUCTION LOGS

9. WELL COMPLETIONS

10. PRIMARY CEMENTING AND SQUEEZE CEMENTING

11. FLUID COMPLETIONS

12. SAND CONTROL

Gravel Pack, Resin and Fraspac

13. WORKOVERS

14. PARAFFIN AND ASPHALTENES

Chemical analysis
Precipitation Mechanism
The wax and Paraffin Problems

15. OIL EMULSIONS

Emulsion Built-up and Emulsifying Agent
Sampling and Analysis
Emulsion Treating
Heat and Chemical Treatment
Electrostatic Coalescing

16. SCALE PROBLEMS

Scale Composition, Prediction and Identification
Mechanic and Chemical methods
Scale Prevention and Inhibitors

17. CORROSION PREVENTIONS

Basic Theory
Detection and Measurement
Prevention and Material Used
Coating and Chemicals
Cathodic Protections and inhibitors

THIS TRAINING IS DESIGNED FOR :

Ø Production, Operations, Facilities and Senior Petroleum Engineers

Ø Surface Equipment Technicians, Technical or Reservoir Engineers

Ø Supervisory Personnel who interact with field facility engineers/operators

Ø Production Managers and Field Production Supervisors

Ø Engineers and other personnel involved with the daily operation and management of producing oil and gas wells.

INSTRUCTOR : Dr.Ir. Sudjati Rachmat, DEA. and Team

VENUE : Hotel Grand Seriti Boutique Bandung

TRAINING DURATION : 4 days

TRAINING TIME : 11 - 14 October 2010

INVESTATION PRICE/PERSON :

1. Rp 7.250.000/person (full fare) or

2. Rp 7.000.000/person (early bird, payment before 4 October 2010) or

3. Rp 6.750.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

1. Training Module

2. Training CD Contains Training Material

3. Certificate

4. Stationeries: NoteBook and Ballpoint

5. Jacket or Waistcoat or T-Shirt

6. Bag or Backpackers

7. Training Photo

8. Training Room with Full AC Facilities and multimedia

9. Once lunch and twice coffeebreak every day of training

10. Qualified instructor

11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

“INSTRUKTUR TRAINING”

Dr.Ir. Sudjati Rachmat, DEA. adalah dosen di jurusan perminyakan ITB sejak tahun 1979 sampai sekarang. Beliau alumnus dari ITB lulus tahun 1977, kemudian melanjutkan pendidikannya di Diplome d’Etude Approfondie Ecole Centrale de Lyon, UCB Lyon I, FRANCE. Dan pada tahun 1985 - 1987 beliau mengambil program Docteur en Mecanique de Fluide (Methode Numerique) Ecole Centrale de Lyon, UCB Lyon I, FRANCE.

Dr. Sudjati Rachmat sering menjadi instruktur dalam banyak pelatihan yang berkaitan dengan perminyakan untuk perusahaan di seluruh Indonesia, diantaranya seperti Pertamina, Chevron, Badak LNG, Total, Vico, Mobil Oil Indonesia, Ministery of Mining and Energy, Unocal Indonesia, Lemigas, IATMI-IWPL Migas, PPTM Migas, PT Caltex Pacific Indonesia, Gulf, Arco, dll.

Topik-topik training yang Beliau sampaikan diantaranya adalah production surface and down hole equipment, Basic Reservoir Engineering, Sucker Rod Pumping Theory and Practice, Production Logging Engineering, Nodal Analysis and Production Optimization, Well Test, Operation and Interpretation, Well Design, Completion and Workover, Numerical and Statistical Method for Petroleum Engineering Problems, Oil-Well Stimulation, Hydraulic Fracturing, Statistics for Petroleum Engineering, Reservoir Simulation for Enhanced Oil Recovery, Applied Reservoir Engineering and Reservoir Simulation, Aspects of Horizontal Well Technology, Geology and Geophysics Modeling, Advanced Programming on Numerical Analysis and Industrial Information System, Management Information System, Well Stimulation of Oil and Gas Reservoir, Horizontal Well Technology, Transportation of Oil and Gas, Sand Control Technology, dan lain-lain.

Beliau banyak melakukan penelitian di bidang MIGAS dan telah mempublikasikan dan menseminarkannya di forum dunia.

INFORMASI TRAINING KE:

PT.MAIRODI MANDIRI SEJAHTERA (MMS)
Telp/Fax: (022) 7814149

SMS Center : 081322050262 atau 085860263043

Email : training@mairodi-training.com atau ptmmsbdg@gmail.com atau ptmmsbdg@yahoo.com atau ptmmsbdg.marketing@gmail.com

Website : http://mairodi-training.com

Contact Person : Yanti Deris Sutanty, Lita Permatasari, Dini Ratna Puri,

Rike Maryani

TRAINING NEEDS ANALYSIS(TNA),TRAINING PLAN, TRAINING BUDGET AND TRAINING IMPACT EVALUATION(TIE)

admin — Wed, 18 Aug 2010 03:53:42 +0000

Date	:	4 - 6 October 2010
Duration	:	3 Days
Venue	:	Bandung(Hotel Banana Inn)
Investation Fee	:	IDR 4.950.000

REGISTER ONLINE NOW

Training Syllabus :

“TRAINING NEEDS ANALYSIS(TNA),TRAINING PLAN, TRAINING BUDGET AND TRAINING IMPACT EVALUATION(TIE)”

PENGANTAR :

Pelaksanaan program training/pelatihan bagi sumber daya manusia hendaknya dipertimbangkan dengan matang mengingat biaya yang dikeluarkan tidak sedikit. Agar program pelatihan memberikan kontribusi yang berarti, maka program pelatihan harus diarahkan kepada area/bidang yang benar-benar membutuhkan pelatihan. Kegagalan program pelatihan bukan hanya tidak tercapainya apa yang menjadi tujuan/target yang hendak dicapai tetapi juga pemborosan dari segi biaya yang dikeluarkan. Untuk itu organisasi perlu melakukan pengendalian terhadap fungsi pelatihan. Pengendalian ini dapat dilakukan dengan merancang program dan anggaran untuk pelatihan. Perancangan program pelatihan berfungsi untuk melihat kemampuan-kemampuan penting apa yang sangat diperlukan, serta kemungkinan-kemungkinan pelatihan di masa mendatang. Perancangan anggaran pelatihan berfungsi untuk mengestimasi biaya-biaya yang harus dikeluarkan untuk melaksanakan suatu pelatihan.

Penentuan prioritas program pelatihan dan anggaran biayanya yang akurat bukanlah hal yang mudah, apalagi untuk organisasi yang ukurannya besar. Untuk itu diperlukan suatu metoda agar tidak hanya mengandalkan penilaian subyektif dari manajer sumber daya manusia atau manajer puncak dalam memutuskan program pelatihan mana yang akan dilaksanakan serta berapa jumlah biaya yang harus dikeluarkannya. Pelatihan ini merupakan peta penunjuk jalan bagaimana seseorang mampu merencanakan suatu pelatihan dan menentukan anggaran biaya yang akan dikeluarkan untuk suatu pelatihan.

Selain perlu direncanakan dengan baik, aktivitas pelatihan juga harus memberikan suatu return yang lebih besar dari jumlah rupiah yang telah dibayarkan untuk membiayai suatu pelaksanaan training. Para pengelola HRD selama ini banyak yang berbicara tentang manfaat training secara kualitatif, dengan gaya bahasa yang umumnya hanya dimengerti oleh orang-orang HRD. Untuk dapat menjustifikasi manfaat setiap pelaksanaan training, maka saat ini sudah saatnya pengelola HRD dapat menampilkan data secara kuantitatif dengan menggunakan “bahasa manajemen”.

Untuk dapat melakukan dan mewujudkan analisis pengaruh training terhadap bisnis secara baik, dibutuhkan alat bantu dan keterampilan yang memadai sekaligus jalinan yang padu dengan hasil analisis kebutuhan training. Untuk itu, pelatihan ini mencoba menyediakan alat bantu dan bekal keterampilan yang dibutuhkan untuk melakukan aktivitas di atas.

SASARAN/MANFAAT YANG DIPEROLEH :

Setelah mengikuti training/pelatihan ini peserta diharapkan mampu :

a. melakukan Training Needs Analysis,

b. membuat anggaran biaya pelaksanaan suatu training,

c. melakukan penilaian atas masing-masing level evaluasi pelatihan

CAKUPAN/OUTLINE MATERI TRAINING :

A. Training Needs Analysis (TNA)

1. Definition and Benefit of Training Needs Analysis

2. Training Needs Analysis Steps

a. Identify the Customer

b. Clarify the Expectations

c. Design the Training Needs Programme

d. Arrange Accsess to Data

e. Collect the Data

f. Make Sense of the Finding

B. Training Budget

1. Some Budgetting Policies for Training Functions

2. The Cost of Doing Training

3. Estimating Cost of Deficiencies

C. Training Impact Evaluation (TIE)

1. Understanding Training Evaluation

2. Linking Performance and Training: The TIE Process

3. Level of Training Evaluation (Kirkpatrick Model) and Return On Training Investment (ROTI)

4. Step 1 : preparation

a. Identify training objective

b. Determine criteria of every level

5. Step 2: Plan and Organize the Data Collection Process

a. Determine Type Data of Every Level

b. Design Instrument Based On Type Data

c. Defining sample

d. Collect the Data

6. Step 3 : Calculate the Data

7. Step 4 : Analyze and Interpret the Data

8. Step 5 : Report on the Findings

SIAPA YANG SEBAIKNYA MENGIKUTI TRAINING INI?

Bagian HRD yang terlibat atau berperan dalam merencanakan suatu training.

INSTRUKTUR : Ir. Hendang Setyo Rukmi, MT dan Ir. Herra Henrakancana

TEMPAT TRAINING : Hotel Banana Inn Bandung

DURASI TRAINING : 3 hari

WAKTU TRAINING : 4 - 6 Oktober 2010

HARGA INVESTASI/PESERTA :

1. Rp 4.950.000/peserta (bayar penuh) atau

2. Rp 4.750.000/peserta (early bird, yang membayar sebelum 27 September 2010) atau

3. Rp 4.500.000/peserta (peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

FASILITAS UNTUK PESERTA :

1. Modul Training

2. CD Training berisi materi training

3. Sertifikat

4. ATK: NoteBook dan Ballpoint

5. Jaket atau rompi atau T-Shirt

6. Tas atau ransel

7. Foto Training

8. Ruang Training dengan fasilitas Full AC dan multimedia

9. Makan siang dan 2 kali coffeebreak

10. Instruktur yang Qualified

11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training - PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

“INSTRUKTUR TRAINING”

Mrs. Hendang Setyo Rukmi,MT is a professional instructor in business and management, especially regarding Financial Management, Cost Accounting, Human Resources Management, Organizational Behavior, Project Management, Engineering Economic, Marketing Management, and Feasibility Studies. She is undergraduate and master’s from ITB. She has international and nationally training experience, including Personnel / Human Resources Management (Laboratory for Management & Business Experts), Developing Through Effective Employee Competency Workshop (Nekstra Knowledge Center), Workshop on COMFAR III Expert and Application of COMFAR for Project Appraisal “(United Nations Industrial Development Organization) and others. she is lecturer in Engineering Industry ITB, in addition to that she also has professional experience at various companies such as PT. Pikiran Rakyat, LPPM-ITB and others.

Mr. Ir. Herra Henrakancana is a professional instructor in business and management, especially regarding Business Administration, Human Resource Management, Financial Management, and Engineering Economics. he is undergraduate from IPB. He has nationally training experience , including Leadership Training, Advanced Leadership, Training for Trainer, Supervisory Management Skill (T-Next Bandung), Root Cause Analysis(LAPI ITB & PT Hi Qualifa Bandung), Maintenance Management(PT D&G Bandung), Engineering Economics Analysis(PT SDM Bandung), Budgeting, Tax Planning, Postgraduate Course in Applied Management(LP2KS Jakarta), Credit Analysis(PMKP Bandung) and others. In addition he also has professional experience at various companies such as PT Media Sarana Cipta, PT SIS Industrial Services, PT Manajemen Qolbu, PT Perkakas Rekadaya Nusantara and others.

INFORMASI TRAINING KE:

PT.MAIRODI MANDIRI SEJAHTERA (MMS)
Telp/Fax: (022) 7814149

SMS Center : 081322050262 atau 085860263043

Email : training@mairodi-training.com atau ptmmsbdg@gmail.com atau ptmmsbdg@yahoo.com atau ptmmsbdg.marketing@gmail.com

Website : http://mairodi-training.com

Contact Person : Yanti Deris Sutanty, Lita Permatasari, Dini Ratna Puri,

Rike Maryani

REFRACTORY AND HEAT INSULATION

admin — Wed, 18 Aug 2010 03:44:37 +0000

Date	:	4 - 7 October 2010
Duration	:	4 Days
Venue	:	Bandung(Hotel Golden Flower)
Investation Fee	:	IDR 6.950.000

REGISTER ONLINE NOW

Training Syllabus:

“REFRACTORY AND HEAT INSULATION”

INTRODUCTION :

Training ini ditujukan kepada peserta yang ingin memahami tentang refraktori dan material refraktori serta aplikasi pada heat insulation. Banyaknya radiasi panas dan adanya system suhu rendah pada banyak lokasi di industry membawa kita kepada perlunya pemahaman yang baik tentang teknologi untuk mengaturnya. Setelah training ini peserta bisa memahami teknologi yang berkaitan dengan refractori dan heat insulation dan bagaimana mengimplementasikannya di lapangan.

TRAINING MATERIAL OUTLINE/CAKUPAN MATERI TRAINING :

1. Introduksi perpindahan panas: konduksi, konveksi dan radiasi

2. Perpindahan panas gabungan konduksi, konveksi dan radiasi

3. Angka konduksi material

4. Physical properties of heat insulating materials

5. Physical properties of heat refractories materials

6. Pengelompokkan (class) insulator

7. Pemilihan insulator dan refraktori

8. Pengaruh ketebalan insulator pada laju perpindahan panas

9. Ketebalan kritis insulator

10. Efek konduksi lingkungan pada penyekatan (insulasi) panas

11. Dinding ruang bakar

12. Insulator temperatur tinggi

13. Insulator temperatur rendah (refrigerasi dan pengkondisian udara)

14. Ekspansi dan penyusutan termal

15. Troubleshooting insulating materials and refractories

16. Studi kasus dan diskusi

INSTRUCTOR : Ir . Pawito Merto Sontowiro, M.Sc.

VENUE : Hotel Golden Flower Bandung

TRAINING DURATION : 4 days

TRAINING TIME : 4 - 7 October 2010

INVESTATION PRICE/PERSON :

1. Rp 6.950.000/person (full fare) or

2. Rp 6.750.000/person (early bird, payment before 27 September 2010) or

3. Rp 6.500.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

1. Training Module

2. Training CD Contains Training Material

3. Certificate

4. Stationeries: NoteBook and Ballpoint

5. Jacket or Waistcoat or T-Shirt

6. Bag or Backpackers

7. Training Photo

8. Training Room with Full AC Facilities and multimedia

9. Once lunch and twice coffeebreak every day of training

10. Qualified instructor

11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

“INSTRUKTUR TRAINING”

Ir. Pawito Merto Sontowiro, Msc adalah alumnus Teknik Mesin ITB dan sejak tahun 1973 menjadi dosen di jurusan tersebut sampai sekarang. Beliau adalah kepala Laboratorium Energi termal Teknik Mesin Institut Teknologi Bandung, Beliau juga pernah menjabat sebagai ketua jurusan Teknik Mesin ITENAS Bandung, Pernah mengajar di SESKOAD, Pernah mengajar di prokerma depnaker-ITB, prokerma PLN-ITB. Beliau juga pernah memperdalam keilmuan di luar negeri seperti Coal Energy Training, Argonne, Chicago, Ill., USA, Combustion Training, Petc, Pittsburgh, Pa, USA dan Pinch Technology, Asian-Australia Energy Cooperation. Bidang spesialisasi Beliau adalah Boiler, Turbin Uap/Gas, Pompa, Kompresor, Konversi Energi dan analisis energy. Pak Pawito Pernah mengerjakan projek pada bidang Modifikasi Sistem Pembakaran Lokomotip D-52, Modifikasi Sistem Penunjang Boiler, Analisis Sistem Boiler, dan lain-lain. Beliau adalah trainer produktif, pernah mengajar training untuk banyak perusahaan di Indonesia diantaranya seperti Chevron Indonesia Company, Chevron pacific Indonesia, Total E&P Indonesie, PT. Pusri, PT. Pupuk Kaltim, PT. BADAK, Depnaker RI, PT. KKA Aceh, KDTP I Bontang, UP-IV PERTAMINA, Kalimantan Prima Coal (KPC), PLN, PT. PERTAMINA, DIKTI, BPPT, PT. Indonesia Power, Pertamina UP II, PT. Pupuk Kujang, PT. Petroleum Consolindo, PT. Indah Kiat Pulp and Paper, PT. Krakatau Steel, PLTU Paiton, PLTU Suralaya, PT. Kaltim Pasifik Amoniak, CNOOC SES LTD, PLTGU BEKASI POWER, PT. INDO FUJI ENGINEERING, PT. CONOCO PHILLIPS, dan lain-lain. Pak Pawito juga aktif menulis buku seperti Perpindahan Kalor, Konversi Energi, Thermodinamika, Pembangkit Uap, Bahan Bakar Dan Pelumas, dan Pompa. Beliau telah melakukan banyak penelitian disertai publikasi ilmiahnya.

INFORMASI TRAINING KE:

PT.MAIRODI MANDIRI SEJAHTERA (MMS)
Telp/Fax: (022) 7814149

SMS Center : 081322050262 atau 085860263043

Email : training@mairodi-training.com atau ptmmsbdg@gmail.com atau ptmmsbdg@yahoo.com atau ptmmsbdg.marketing@gmail.com

Website : http://mairodi-training.com

Contact Person : Yanti Deris Sutanty, Lita Permatasari, Dini Ratna Puri,

Rike Maryani

RELIABILITY CENTERED MAINTENANCE (RCM)

admin — Wed, 18 Aug 2010 03:34:26 +0000

Date	:	18 - 20 October 2010
Duration	:	3 Days
Venue	:	Bandung(Hotel Golden Flower )
Investation Fee	:	IDR 5.250.000

REGISTER ONLINE NOW

Training Syllabus:

“RELIABILITY CENTERED MAINTENANCE (RCM)”

TRAINING INTRODUCTION :

This course is beneficial especially for continuous process industry and utilizes sophisticate and expensive production equipment, such as: Oil and Gas Industry, Electricity Plant, Petrochemical Plant, Marine Industry, Manufacturing, Automotive, Assembling Industry, Aviation, Construction, Pulp and Paper, Mining, etc. The course is designed by considering the need of maintenance method that reliable to ensure the success of production, a method of maintenance to push downs a break down or unplanned disturbance. The requirement of efficient and effective method of maintenance becomes more important when plant facility is automatic system. The big loss can come, if it is late to improve maintenance operation system, low productivity, wasting working hours, last production, engine big failure, and in-harmony relation with customer, successful.

TRAINING OBJECTIVES :

To understand the Reliability-Centered Maintenance (RCM) as basic of maintenance management implementation or as an aid-tool for cost management and as part of project management.
To understand maintenance philosophy based an the third generation of previous maintenance generation i.e.: first generation (breakdown maintenance) and second generation (preventive maintenance)
To avoid total failure by knowing what kind of failure will happen.
To understand root cause mechanism of failure
To minimize maintenance cost and operate the equipment until maximum capacity
To increase output and improve productivity of existing facility
To get plant equipment, reliable, effective and efficient

TRAINING MATERIAL OUTLINE :

1. What is Reliability-Centered Maintenance (RCM)?

Fundamental change of maintenance philosophy
Maintenance and RCM
Basic idea of RCM
RCM implementation
RCM achievement

2. Plant Registration

What is Plant Registration?
What is equipment?
How to number the asset?
What kind of information has to be registered?
How to compile plant registration?

3. Function and Failure

Function and standard performance
Malfunction
Failure mode
Failure effects
Failure Consequences
Hidden failure consequent
Safety and environment consequent
Operational consequent
Summary

4. Preventive Actions

Engineering feasibility
Life time dependable failure
Scheduled restoration
Scheduled replacement
Life time undependable failure
Scheduled condition monitoring
Selection of preventive actions

5. Defaults Actions

Scheduled efforts to find failure
Non Scheduled maintenance
Re-designing
Lubrication
Zone inspection and walk-around check

6. RCM Decision Diagram

Effort and consequent integration
RCM decision making process
Filling out decision sheet

7. Plan, Organize and Control Proposed Tasks

Task grouping
Planning system and maintenance control
Failure report
Various Failure and its History
Failure process
Six failure patterns
Historical data

8. RCM Implementation

Who knows?
Pre-review RCM group
Facilitator and auditor
Implementation strategy
Short term approach
RCM Forever

9. Build skill in RCM

What is RCM Achievement?
Result of RCM analysis
Benefit of RCM
Why RCM?

10. RCM History

Airline enterprise experience
RCM at other industry

11. Case Study

WHO SHOULD ATTEND THIS TRAINING?

The following selected participants should attend this course:

Ø Maintenance Engineer/ Superintendent/ Supervisor

Ø Rotating Engineer/ Superintendent/Supervisor

Ø Power Plant Engineer/Superintendent /Supervisor

Ø Manufacturing Manager

Ø Everybody who wants to broaden knowledge and interest in this topics

VENUE : Hotel Golden Flower Bandung

INSTRUCTOR : Ir. Deddy Nugraha

TRAINING DURATION : 3 days

TRAINING TIME : 18 - 20 October 2010

INVESTATION PRICE/PERSON :

1. Rp 5.250.000/person (full fare) or

2. Rp 5.000.000/person (early bird, payment before 11 October 2010) or

3. Rp 4.750.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

1. Training Module

2. Training CD Contains Training Material

3. Certificate

4. Stationeries: NoteBook and Ballpoint

5. Jacket or Waistcoat or T-Shirt

6. Bag or Backpackers

7. Training Photo

8. Training Room with Full AC Facilities and multimedia

9. Once lunch and twice coffeebreak every day of training

10. Qualified instructor

11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

“TRAINING INSTRUCTOR”

Ir. Deddy Nugraha is a dedicated experienced fulltime trainer and technical consultant since 2002. He holds a B.S. degree in Mechanical Engineering from ITB, Bandung. He has worked nationally in a wide variety of industries including: technology, aerospace, utilities, auditing, mining and institutions thus engaged as a corporate consultant. He also holds certifications for those particular fields from Snecma, France; Engine Support Inc., USA; Danobat, Spain; DNV, Singapore; MTU, Germany and FAA Auditor, USA. Mr. Nugraha is a member of Indonesian Society for Reliability and was elected as General Sectretay for 2004-2007 period. He has trained hundreds of managers, engineers and floor associates, subjects taught to include; CMMS, RCM, TPM, Project Management, Quality Process Control, Corrosion Control and Protection, Failure Analysis, Engineering Design, Instalation & Constrcution, Inventory Control and Management. Major clients include: Pertamina, British Petroleum, Petrochina, Siemen Power, PT. Indonesia Power, PT. Krakatau Steel, Freeport Indonesia, PT. Surveyor Indonesia, Chevron, Medco Energy, PT. Aneka Tambang, Garuda Maintenance Facility, PT. Perusahaan Gas Negara, PT. Semen Padang, PT. Semen Gresik, PT. Indah Kiat Pulp & Paper, PT. Tjiwi Kimia, PT. Pupuk Kujang and PT. Kaltim Prima Coal.

INFORMASI TRAINING KE:

PT.MAIRODI MANDIRI SEJAHTERA (MMS)
Telp/Fax: (022) 7814149

SMS Center : 081322050262 atau 085860263043

Email : training@mairodi-training.com atau ptmmsbdg@gmail.com atau ptmmsbdg@yahoo.com atau ptmmsbdg.marketing@gmail.com

Website : http://mairodi-training.com

Contact Person : Yanti Deris Sutanty, Lita Permatasari, Dini Ratna Puri,

Rike Maryani

PUMP SELECTION, DESIGN AND OPERATION FOR OIL AND GAS SURFACE PRODUCTION FACILITIES

admin — Wed, 18 Aug 2010 03:29:28 +0000

Date	:	18 - 21 October 2010
Duration	:	4 Days
Venue	:	Bali
Investation Fee	:	IDR 8.250.000

REGISTER ONLINE NOW

Training Syllabus:

“PUMP SELECTION, DESIGN AND OPERATION FOR OIL AND GAS SURFACE PRODUCTION FACILITIES”

TRAINING OBJECTIVES :

After participate in this course, the participants will be able and capable to :

Understand the basic concept of oil and gas handling with surface processes and operation facilities , and how to operate pump technology in field application.
Diagnostic of oil and gas flow performance under actual pumping drive mechanism and future performance with current handling processes.
Analyze the production flow potential of oil and gas flow under actual handling facilities system processes and to plan the better development processes according to fluid flow capacity.
Understand the fundamentals of microscopic and macroscopic aspects the phenomena of oil and gas handling processes and operation with given surface facilities and pumping system.

AUDIENCE: No specified (Operator/Sr. Operator/Engineer or Non Engineer)

TRAINING MATERIAL OUTLINE :

1. Introduction to Oil and Gas Production Operation

2. Oil Surface Production Facilities

a. Well Equipments

b. Pigging System

c. Separator

d. Gas Scrubber

e. Gas Dehydarator

f. Pumps : Centrifugal, Reciprocating, Diaphragm

3. Gas Surface Processing Facilities

a. Gas Sweetening

b. Heat Exchanger

c. Fractionation, Liquefaction, Refrigeration System

d. Compressor

4. Pump Basic Theory

a. Centrifugal Pump

b. Conservation of Mass

c. Specific Velocity

d. Pump Performance

e. Cavitations

5. Pump Specification

a. Pump Specification

b. Flow Capacity

c. Fluid Properties

d. Head

e. Net Positive Heads

f. Rotation Determination and Pump Types

g. Viscous Fluid Correction

h. Material Selection

i. Prime Movers Selection

6. Pump Application

a. Pump Installation Plan

b. Pump Application Example

7. Pump Construction

a. Pump Classification by Impeller

b. Pump Classification by Casing

c. Pump Classification by Stage Number

d. Pump Classification by Axis Position

8. Pump Operation

a. Head Capacity Curve

b. Parallel and Serial Operation

c. Capacity Regulator

d. Water Hummer

e. Surging

f. Pressure Fluctuation

g. Automatic Operation

9. Pump Instalation

a. Horizontal Instalation

b. Vertical Instalation

c. Submersible Instalation

d. Pipping System

e. Vibration and Noise Protection

10. Pump Maintenance

a. First Inspection

b. Operation Condition Observation

c. Safety Instrument

d. Maintenance Management

e. Overhaul

11. Pump Trouble Shooting

a. General Trouble Shooting

b. Submersible Pump Trouble Shooting

INSTRUCTOR : Dr.Ir. Sudjati Rachmat, DEA. and Team

VENUE : Bali

TRAINING DURATION : 4 days

TRAINING TIME : 18 - 21 October 2010

INVESTATION PRICE/PERSON :

1. Rp 8.250.000/person (full fare) or

2. Rp 8.000.000/person (early bird, payment before 11 October 2010) or

3. Rp 7.750.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

1. Training Module

2. Training CD Contains Training Material

3. Certificate

4. Stationeries: NoteBook and Ballpoint

5. Jacket or Waistcoat or T-Shirt

6. Bag or Backpackers

7. Training Photo

8. Training Room with Full AC Facilities and multimedia

9. Once lunch and twice coffeebreak every day of training

10. Qualified instructor

11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

“INSTRUKTUR TRAINING”

Beliau banyak melakukan penelitian di bidang MIGAS dan telah mempublikasikan dan menseminarkannya di forum dunia.

INFORMASI TRAINING KE:

PT.MAIRODI MANDIRI SEJAHTERA (MMS)
Telp/Fax: (022) 7814149

SMS Center : 081322050262 atau 085860263043

Email : training@mairodi-training.com atau ptmmsbdg@gmail.com atau ptmmsbdg@yahoo.com atau ptmmsbdg.marketing@gmail.com

Website : http://mairodi-training.com

Contact Person : Yanti Deris Sutanty, Lita Permatasari, Dini Ratna Puri,

Rike Maryani

” PRINSIP DASAR DAN PROSEDUR PENGADAAN BARANG & JASA” (Global Trend In Purchasing Management And E-Procurement)

admin — Wed, 18 Aug 2010 03:22:11 +0000

Date	:	4 - 6 October 2010
Duration	:	3 Days
Venue	:	Bandung(Hotel Golden Flower)
Investation Fee	:	IDR 4.950.000

REGISTER ONLINE NOW

Training syllabus:

” PRINSIP DASAR DAN PROSEDUR PENGADAAN BARANG & JASA”

(Global Trend In Purchasing Management And E-Procurement)

PENGANTAR :

Masalah procurement management merupakan masalah yang sangat penting bagi kehidupan sebuah perusahaan. Industri manufaktur rata-rata menghabiskan lebih dari 65% cost of good manufactured nya untuk biaya material. Peningkatan efisiensi dan efektifitas di sektor material akan sangat mempengaruhi biaya produksi perusahaan yang pada akhirnya akan meningkatkan competitive advantage perusahaan di era globalisasi yang semakin mendekat. Di era globalisasi ini masalah quality, cost dan delivery dari material yang digunakan akan terasa semakin penting. Dalam pelatihan ini akan dibahas studi kasus pemecahan masalah procurement management, masalah supplier selection , outsourcing management dan buyer-supplier partnership. Di era global ini para praktisi pengadaan mulai memanfatkan internet dan intranet untuk kepentingan pengadaan. Semua proses pengadaan akan dilakukan menggunakan sarana ini. Kecenderungan ini dikenal dengan istilah e-Procurement.

CAKUPAN MATERI TRAINING :

1. Manajemen strategi.

2. Pengadaan di era Global.

3. Perumusan strategi dan kebijakan pengadaan

4. Outsourcing Management Strategy

5. Centralized and Decentralized Mix Strategy.

6. Teknik Pemilihan Supplier dan Supplier Development

7. Pengadaan barang dan jasa dari pasar Internasional.

8. Seni dan Teknik Negosiasi

9. Price Analysis

10. Buyer-Supplier Partnership.

11. E-Procurement

a. Channel Enhancement

b. E-Procurement Scenario

c. Enhancement E-Procurement Model

d. Impact of Channel Enhancement

e. Benefits E-Pro for Suppliers

12. Peragaan Software untuk Prakiraan harga Barang dan Pengukuran Performansi Sistem Manajemen Pengadaan.

13. Studi kasus dan diskusi

a. Pembahasan kasus seleksi supplier.

b. Pembahasan kasus kemitraan dua perusahaan besar di dunia.

c. Pembahasan kasus outsourcing.

d. E-Procurement di sebuah BUMN terkemuka.

INSTRUCTOR : Achmad Fadjar, SE, MM.Ak, Ir. Iim Takwim, MM, dan

R. Susanto H., B.Ac., SE., MM., Ak.

VENUE : Hotel Golden Flower Bandung

TRAINING DURATION : 3 hari

TRAINING TIME : 4 - 6 Oktober 2010

HARGA INVESTASI/ PESERTA :

1. Rp 4.950.000/peserta (bayar penuh) atau

2. Rp 4.750.000/peserta ( early bird, yang membayar sebelum 27 September 2010) atau

3. Rp 4.500.000/peserta (peserta bergroup yang terdiri dari 3 orang peserta atau lebih dari 1 perusahaan yang sama)

FASILITAS UNTUK PESERTA :

1. Modul Training

2. CD Training berisi materi training

3. Sertifikat

4. ATK: NoteBook dan Ballpoint

5. Jaket atau rompi atau T-Shirt

6. Tas atau ransel

7. Foto Training

8. Ruang Training dengan fasilitas Full AC dan multimedia

9. Makan siang dan coffeebreak

10. Instruktur yang Qualified

11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training - PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

“INSTRUKTUR TRAINING”

Achmad Fadjar, SE, MM.Ak, sarjana dan master lulusan Universitas Padjadjaran adalah praktisi serta konsultan senior dalam bidang Akunting, Finance, Marketing dan HR Training & Development. Telah lebih dari sepuluh tahun beliau sebagai praktisi dan pengajar, telah banyak membantu para klien dalam membuka wawasan dan menyelesaikan tugas-tugas pekerjaan dengan effective dan effisien. Pengalaman sekian lama telah mengantar beliau dalam penguasaan berbagai topic ilmu antara lain Effective Presentation & Negotiation Skill, Interpersonal Skill and Communication Skill , Leadership & Team Development for Management Success , SDM Berbasis Kompetensi , Outsourcing Management, Tender & Contract System , Financial & Budgeting serta banyak lagi topik lainnya.

Beberapa klien/ user yang pernah mengunakan jasa beliau : PT. Timah Tbk. PT Arun LNG, PT. Batu Bara Bukit Kendi, PT. Petrosea Tbk. , PT. Chevron Pacific Ind., PT. Freeport Ind. PT. Banpu ( Infocomindo ), PT. Medco E&P, PT. Semen Gresik ( persero ) Tbk. Petrochina Int’l, PT. Vico Indonesia, Pertamina, Cnooc Ses Ltd., PT. British Petroleum, BP Migas, PT. Pupuk Kaltim, PT. Badak NGL, PT. Inco Ind. Tbk. PT. Nusa Halmahera, PT. Kaltim Pacific Amoniak, PT. Surveyor Ind. PT. Samindo Utama Kaltim, PT. Lekomaras, PT. Nusa Halmahera Mineral, PT. Pusri, PT. Kaltim Prima Coal ( KPC ), PLN, UTSG, HESS Indonesia Pangkah Ltd, PT. Aneka Tambang, PT. Adaro Indonesia, PT. Puncak Jaya Power, PT. Sandvick SMC, PT. Rekayasa Industri, PT. Kideco Jaya Agung, PT. RedPath Indonesia, PT. Kitadin Embalut, PT. Indominco, PT. Centra Indo Teknik, PT. Arutmin, PT RedPath Indonesia, PT. Bama Bumi Sentosa, PT. Santos, PT. Indomuro Kencana Straits, PT. Jasindo, PT. Krakatau Wajatama, PT. Citic Seram Energi, PT. Kaltim Prima Industri, PT. Connoco Phillips Indonesia, Total E & P Indonesie, PT Energi Sengkang, PT. Hexindo, PT. Turbaindo Coal Mining, PT Berau Coal, Poltek Bengkalis,PT. Bank Mandiri, PT. Angkasa Pura 2, Embassy of the Kingdom of Netherlands, PT. Inspindo Mulia, Pertamina Hulu Energi ONWJ Ltd., UNDP, dll.

Ir. Iim Takwim, MM, sarjana lulusan Universitas Pasundan adalah Ketua Program Studi Teknik Industri pada STT Jabar serta Lecture of Production System, Management Information System, Simulation System, Product Design System, Product Design of Facilities, Research of Operation, System of Performances Analysis, Feasibility Study of Industries, Inventory Control and Network Planning, Performance and Productivites of Management Industries. Begitu banyak pengalaman profesi beliau di berbagai bidang industri , antara lain :

Production System & Procedures Plan of Manufacturing at PT. IPTN
Technical Staff of Industrial Engineering Division at PT. IPTN (Sub-Contractors, Off-Load and Industrial Domestic Guidance
Assisstant Manager of HRD of Textile Industry
Manager of Production in Garments Industry at PT. Fit-U
Production Manager and Junior Consultan of ISO 9001

Berbagai topic Training dan Scientific Work beliau, antara lain :

Instructure Bar-chat and Line Balancing Job Establishment and Grading System
Awareness and Introduction of ISO 9001 : 2000 (QMS)
Junior of Management Representative ISO 9001 : 2000 of Production
Iron Casting Technology at IRDMMI/MIDC and JICA-Jepang
Management Strategi and Competency
Total Quality Management
Logistic and Supply Change Management (SCM)
Integreted System of Industrial Management
Cost Of Project and Tools Management
Corporate Social Responsibility
Six and Lean Sigma
Competency Of Professional-SDM, serta banyak lagi lainnya.

R. Susanto H., B.Ac., SE., MM., Ak. lulusan dari universitas padjadjaran Bandung. Untuk meningkatkan kemampuannya, Pak Susanto banyak menimba ilmu di jalur non formal, seperti kursus tata buku, kursus Akuntansi Dasar II, Kursus Akuntansi Terampil, Kursus Akuntansi Mahir, Kursus Manajer Pemasaran, Kursus Manajer Executive, Kursus Manajer Keuangan, kursus Pemeriksaan Pengelolaan PPA STAN Badan Diklat Departemen Keuangan RI, Kursus Manajemen, kursus Akuntansi untuk para Pejabat dan Anggota Tim Audit, SPI, PT. IPTN, selama 7 bulan sebagai Insruktur, kursus EDP Audit (Electronic Data Processing Audit) I, kursus Aplikasi Perpajakan, kursus Internal Control & Audit, Tim Sosialisasi Sistem Informasi Akuntansi Pergerakan Material, Inventory, Fixed Asset, PT. Dirgantara Indonesia, Tim Audit Operasional/Internal & Restrukturisasi Utang PT. Dirgantara Indonesia, Forum Komunikasi Internal Audit/SPI BUMN/D se Indonesia, penyusun laporan Keuangan FKSPI, Counterpart Audit International/External Auditor Ernst & Young & BPKP, PT. IPTN/Dirgantara Indonesia, 1992-2002, kursus Konsultan Pendampingan UKM, Bank Indonesia, Program Retooling, Asian Development Bank-Dikti-MSM Consultant Bidang Ak Keuangan dan Audit, 2004.

Pak Susanto memiliki banyak pengalaman real praktis dan pernah terjun langsung dalam proses bisnis, seperti keterlibatan beliau sebagai Kepala Cabang Subsidiary PT. Modern Photo Film Co., PT. Honoris Jaya Trad. Co. Ltd, Bandung & Padang, Asst. Div. Manager PT. Suiting Jaya Raya Jakarta, Sales Manager PD. Picard Jaya Marketing Jakarta, Sales Coordinator PD. Samudra Jaya/New Century Jakarta, Manager Umum PT. MI Permai Jakarta, Koordinator Pendidikan IMTI Jakarta, Ketua Tim/Kep Biro/Supervisor-usulan Internal Auditor merangkap Kepala Departemen Keuangan SUM Transportasi PT. Dirgantara Indonesia , Staf UPT.PIB. Pusat Inkubator Bisnis UNPAD Orientasi Kewirausahaan, Ketua Jurusan Akuntansi & Manajemen Perpajakan Poltek Pajajaran 1998 s.d 2002, Kepala Pusat Konsultasi Bisnis & Profit Centre STMIK-MI 2002 s.d 2004., Marketing Representative : PT. Bank Niaga Bandung, Oktober 2002 s.d 2004 (The Best Marketing Area Jabar 2002), dan lain-lain.

Di bidang akademik Pak Susanto menjadi dosen atau mengajar di banyak perguruan tinggi di Bandung, seperti UNPAD, PINB Bandung, Poltek Pajajaran, A2B, STMIK Bandung, STMIK Mardira Indonesia, ATB, STIE AKPI, STIE STAN IM, PIJ, STAIN Fak. Tarbiyah Sabili, Universitas Widyatama, STIE Ekuitas Bank Jabar, AMIK Tunas Patria, Politeknik Praktisi.

Dengan ilmu dan pengalaman yang demikian banyak, Pak Susanto telah menjadi trainer pada banyak kelas training untuk perusahaan-perusahaan yang ada di Indonesia untuk topik-topik training di bidang keahlian beliau, seperti:

Tax & Financial Control
Cash Management
Finance Reporting for The Petroleum Industry
Laporan Keuangan Konsolidasi
Analisis Laporan Keuangan untuk industri Minyak dan Gas
Advanced Essential Account Payable
Rasio keuangan perusahaan
Financial Statement Analysis and Financial Projection
Teleconference Petty Cash Management & Administration
Budgeting & Cost Control for Administration and Secretary
Financial Statement Analysis
Fixed Assets General Accounting
Analisis Kinerja Keuangan
Human Resource and Accounting matters
Budget Cashflow
Budget cashflow, Reporting & Forecasting
Financial for non financial
Basic accounting dan intermediate accounting
Accounting Management
Essential of accounting payable
Akuntansi Keuangan Lanjutan
Creative accounting and financial disclosure
Dan lain-lain

INFORMASI TRAINING KE:

PT.MAIRODI MANDIRI SEJAHTERA (MMS)
Telp/Fax: (022) 7814149

SMS Center : 081322050262 atau 085860263043

Email : training@mairodi-training.com atau ptmmsbdg@gmail.com atau ptmmsbdg@yahoo.com atau ptmmsbdg.marketing@gmail.com

Website : http://mairodi-training.com

Contact Person : Yanti Deris Sutanty, Lita Permatasari, Dini Ratna Puri,

Rike Maryani

OIL AND GAS HANDLING FACILITIES

admin — Wed, 18 Aug 2010 03:13:59 +0000

Date	:	4 - 7 October 2010
Duration	:	4 Days
Venue	:	Bandung(Hotel Grand Seriti)
Investation Fee	:	IDR 7.750.000

REGISTER ONLINE NOW

Training Syllabus:

“OIL AND GAS HANDLING FACILITIES”

TRAINING OBJECTIVES :

After participate in this course, the participants will be able and capable to :

Understand the basic concept of oil and gas handling processes and facilities, and how to operate this technology in field application.
Diagnostic of oil and gas reservoir performance under actual drive mechanism and future performance with current handling processes.
Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil and gas handling processes.

AUDIENCE: No specified (Operator/Sr. Operator/Engineer or Non Engineer)

TRAINING MATERIAL OUTLINE :

1. Gas Handling Facilities

Introduction to Gas Handling and Facilities
Gas Properties

Ø Ideal gas

Ø Real Gas

Ø Gas Formation Volume Factor

Ø Gas Compressibility

Ø Gas-Water System

Ø Gas-Condensate System

c.Gas Reservoir Performance

Ø Reservoir Gas Flow

Ø Gas Reserves

Ø Well Completion Effect

Ø Tight Gas Well

Ø Gas Well Testing

d. Gas Piping System

Ø Basic Flow Equation

Ø Flow in Wells and Flow in Pipelines

Ø Effect of Liquids

Ø Use of Pressure Traverse Curve

Ø Liquid Removal from Gas Wells

e. Gas Compression

Ø Type of Compressors

Ø Compressor Design

Ø Centrifugal Compressor

f. Total System Analysis

Ø Tubing and Flow Line Effect

Ø Separator Pressure Effect

Ø Compressor Selection

g. Flow Measuring

Ø Orifice Metering

Ø Metering System Design

Ø Other Metering Methods

h. Gas Condensate Reservoir

Ø Well Testing and Sampling

Ø Gas Cycling

i. Field Operation Problems

Ø Pressure Cumulative Production Plot

Ø Hydrate Formation

Ø Sour Gas Production

Ø Corrosion Control With Inhibitors

Ø Sulfur Deposition

j. Gas Processing

Ø Field treatment of Natural Gas

Ø Gas Plant Operation

Ø Gas Dehydration

Ø Gas Sweetening

2. Oil Handling Facilities

Oil Well Surface Production Equipment and Operation

Ø Oil Well Equipment

Ø Oil Well Production Operation

Ø Well Automatic Safety Device

b. Oil Gathering System. Manifold and Flowline

Ø Oil Gathering System

Ø Maniflod System

Ø Flow line Sizing and Design

c. Crude Oil and Gas Separation

Ø Separator and Principle of Separation

Ø Design of Separator

Ø Oil Dehydration

d. Principles of Measurement

Ø Introduction to Measurement

Ø Crude Oil Measurement

Ø Gas Measurement

e. Well Test

Ø Introduction

Ø Responsibility for Test

Ø Preparation for Test

Ø Types of Well Test

Ø Equipment and Procedures

Ø Accuracy of Fluid Measurement

Ø Problem in Testing

Ø Type of Test

INSTRUCTOR : Dr.Ir. Sudjati Rachmat, DEA. and Team

VENUE : Hotel Grand Seriti Boutique Bandung

TRAINING DURATION : 4 days

TRAINING TIME : 4 - 7 October 2010

INVESTATION PRICE/PERSON :

1. Rp 7.750.000/person (full fare) or

2. Rp 7.500.000/person (early bird, payment before 27 September 2010) or

3. Rp 7.250.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

1. Training Module

2. Training CD Contains Training Material

3. Certificate

4. Stationeries: NoteBook and Ballpoint

5. Jacket or Waistcoat or T-Shirt

6. Bag or Backpackers

7. Training Photo

8. Training Room with Full AC Facilities and multimedia

9. Once lunch and twice coffeebreak every day of training

10. Qualified instructor

11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

“INSTRUKTUR TRAINING”

Beliau banyak melakukan penelitian di bidang MIGAS dan telah mempublikasikan dan menseminarkannya di forum dunia.

INFORMASI TRAINING KE:

PT.MAIRODI MANDIRI SEJAHTERA (MMS)
Telp/Fax: (022) 7814149

SMS Center : 081322050262 atau 085860263043

Email : training@mairodi-training.com atau ptmmsbdg@gmail.com atau ptmmsbdg@yahoo.com atau ptmmsbdg.marketing@gmail.com

Website : http://mairodi-training.com

Contact Person : Yanti Deris Sutanty, Lita Permatasari, Dini Ratna Puri,

Rike Maryani

MATERIAL SKILL KNOWLEDGE FOR WAREHOUSE PEOPLE

admin — Wed, 18 Aug 2010 03:02:32 +0000

Date	:	11 - 13 October 2010
Duration	:	3 Days
Venue	:	Bandung(Hotel Grand Seriti)
Investation Fee	:	IDR 5.250.000

REGISTER ONLINE NOW

Training Syllabus:

“MATERIAL SKILL KNOWLEDGE FOR WAREHOUSE PEOPLE”

TRAINING OBJECTIVES :

To introduce the participants to standard classification and specification of various materials commonly used in the oil and gas industry and to improve their knowledge on the use of those materials in the field.

TRAINING MATERIAL OUTLINE/CONTENTS:

1. Material Classification: Ferrous and non ferrous metal, ceramic, plastic and rubber in bars, plate sheets and wire products

2. Material standard and specification

3. Material Characteristic: Physical, Mechanical, Chemical and Technology

4. Manufacturing Process of Material

5. Material Degradation

6. Bearing, shaft seal, belt, roller chain, Fasteners

7. Wire ropes, cordage and tackles

WHO SHOULD ATTEND THIS TRAINING ?

Those who work in the logistics / materials department i.e. purchasing warehousing, inventory control specially those who actually handle the materials receiving and storage.

INSTRUCTOR : Ir. Djoko Hadi Prajitno, MSME.

VENUE : Hotel Grand Seriti Boutique Bandung

TRAINING DURATION : 3 days

TRAINING TIME : 11 - 13 October 2010

INVESTATION PRICE/PERSON :

1. Rp 5.250.000/person (full fare) or

2. Rp 5.000.000/person (early bird, payment before 4 October 2010) or

3. Rp 4.750.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS :

1. Training Module

2. Training CD Contains Training Material

3. Certificate

4. Stationeries: NoteBook and Ballpoint

5. Jacket or Waistcoat or T-Shirt

6. Bag or Backpackers

7. Training Photo

8. Training Room with Full AC Facilities and multimedia

9. Once lunch and twice coffeebreak every day of training

10. Qualified instructor

11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

“TRAINING INSTRUCTOR”

Ir. Djoko Hadi Prajitno, MSME. was graduated from Mining Metallurgy Bandung Institute of Technology (ITB) and Material Engineering UNSW Australia. He is as expert in Metallurgy/materials engineer at Metallurgy Laboratory Pusat Teknologi Nuklir Bahan dan Radiometri (PTNBR) Badan tenaga nuklir nasional (BATAN) Bandung. He is also lecturer at University of Jenderal Achmad Yani Bandung and lecturer at ITENAS (Institut teknologi nasional) Bandung. In campus he teachs material engineering, corrosion, advanced material, coating and metallurgy. He has researched some topics related to his expertise such as

Research and development metal alloy with zirconium matrix
Research and development coating of metal alloy inconel with aluminate in collaboration with mining engineering ITB
Production and development of compound alloy between nikel-aluminida metals in collaboration with mechanical engineering ITB
Coating of nikel aluminida at inconel alloy with spray Coating in collaboation with mechanical engineering ITB
Research on Coating
Research for production of material for stater drive Hercules airoplane in collaboration with DISLITBANG TNI AU
Welding research of dissimilar metal
And others

He frequently teachs training class for participants from many Indonesian companies. he has experience and knowledge about materials and skill that can be beneficial for warehouse people. He is member or has experience at some organizations such as HFI, Indonesian Corrosion Association, LSP AKN, Indosian Petroleum Association, National America Corrosion Engineer . Related to his expertise, he has much field experiences.

INFORMASI TRAINING KE:

PT.MAIRODI MANDIRI SEJAHTERA (MMS)
Telp/Fax: (022) 7814149

SMS Center : 081322050262 atau 085860263043

Email : training@mairodi-training.com atau ptmmsbdg@gmail.com atau ptmmsbdg@yahoo.com atau ptmmsbdg.marketing@gmail.com

Website : http://mairodi-training.com

Contact Person : Yanti Deris Sutanty, Lita Permatasari, Dini Ratna Puri,

Rike Maryani

LOGISTICS AND SUPPLY CHAIN MANAGEMENT: CONCEPT, STRATEGY AND IMPLEMENTATION

admin — Wed, 18 Aug 2010 02:56:46 +0000

Date	:	18 - 21 October 2010
Duration	:	4 Days
Venue	:	Bandung(Hotel Golden Flower)
Investation Fee	:	IDR 7.250.000

REGISTER ONLINE NOW

Silabus Training:

“LOGISTICS AND SUPPLY CHAIN MANAGEMENT: CONCEPT, STRATEGY AND IMPLEMENTATION”

INTRODUCTION :

Dinamika lingkungan industri serta persaingan yang semakin ketat telah mengubah sistem manajemen logistik yang selama ini dikenal. Supply chain management didefinisikan sebagai rangkaian aktivitas sejak dilakukan pembelian material, proses transformasi material menjadi bahan setengah jadi dan produk jadi serta mendistribusikannya melalui sistem distribusi yang ada. Jadi, supply chain mengatur aktivitas sejak di supply cycle, response cycle sampai ke delivery cycle.

Perkembangan teknologi informasi telah banyak menyumbang tumbuhnya sistem supply chain management. Saat ini semua fungsi manajemen logistik telah dapat dilakukan dengan menggunakan fasilitas internet dan intranet. Penggunaan Web dalam supply chain telah menjadi trend di perusahaan industri manufaktur dan industri jasa terkemuka akhir akhir ini.

Workshop tiga hari ini dimaksudkan untuk memberikan pengertian mendalam tentang supply chain management dan dukungan teknologi informasi dalam operasinya. Workshop diberikan dengan case method disertai dengan peragaan penggunaan web untuk aktivitas supply chain management.

Pemandu workshop terdiri dari praktisi dan akademisi yang berpengalaman melakukan disain sistem web-based supply chain management di beberapa perusahaan terkemuka di Indonesia.

TRAINING MATERIAL OUTLINE :

1. Redefinisi, evolusi dan peran logistik dalam dunia usaha.

Paradigma baru manajemen logistik.
Manajemen logistik sebagai sebuah sistem.
Redefinisi sistem manajemen logistik.
Evolusi sistem manajemen logistik dan supply chain management.
Pengaruh perkembangan teknologi informasi terhadap sistem manajemen logistik

2. Mengukur performansi sistem manajemen logistik.

Ukuran performansi sistem manajemen logistik.
Produktivitas sistem manajemen logistik.
Kualitas sistem manajemen logistik.

3. Perencanaan dan manajemen persediaan.

Dasar manajemen persediaan.
Mengukur performansi sistem persediaan.
Prakiraan kebutuhan barang.
Order quantity engineering.
Inventory control policy and replenishment design.
Disain sistem dan manajemen persediaan.

4. Supply management.

Perkembangan terakhir konsep supply management.
Mengukur performansi supply management.
Vendor Selection Technique.
Negotiation Techcnique
Supplier integration and relationship management.
Teknologi informasi dan aplikasi sistem internet dalam supply management.

5. Manajemen transportasi dan distribusi

Model sistem transportasi dan distribusi.
Rincian aktivitas sistem transportasi.
Mengukur produktivitas sistem transportasi.
Logistics network design.
Shipment planning and management.
Fleet, container and yard management.
Freight and document management.

6. Manajemen Pergudangan

Fungsi fungsi dalam manajemen pergudangan.
Profil aktivitas manajemen pergudangan.
Mengukur performansi manajemen pergudangan.
Prinsip prinsip penerimaan barang.
Operasi penyimpanan barang.
Order picking operations.
Shipping principles.

7. Disain organisasi logistik.

Manajemen organisasi supply chain.
Logistics strategic planning and project management.
Logistics process and activity management.

8. Logistics and supply chain information system.

Arsitektur sistem informasi manajemen logistik dan supply chain.
Logistics data warehousing and decision support system.
Manajemen logistik berbasis Web
Paperless and wireless logistics system.

9. Studi kasus.

Material Requirement Planning (MRP) and Supply Chain at Alenia Aircraft.
Jaguar-Nippondenso Relation.
Pengembangan Web-based Logistics Planning System and e-Procurement di sebuah BUMN terkemuka.
Vendor Selection di sebuah perusahaan terkemuka di dunia.

10. Inventory Control Techniques

Klasifikasi persediaan.
Biaya persediaan.
Sistem pengendalian persediaan.
Economic order quantity; Reorder point dan Safety Stock untuk Independent - material
Fixed order period inventory system
Latihan perhitungan optimasi persediaan .

11. Inventarisasi dan auditing persediaan

Manfaat inventarisasi persediaan.
Teknik inventarisasi persediaan.
Inventarisasi total dan inventarisasi sebagian.
Laporan Hasil inventarisasi.

12. Sistem Informasi dan Komputerisasi Sistem Manajemen Pergudangan

Perbedaan data dan informasi pergudangan.
Apa yang dimaksud dengan sistem informasi manajemen.
Pembentukan Master File Kodifikasi Barang.
Pembentukan Master File Persediaan di Gudang.
Penentuan Kode Lokasi Barang.
Teknik Pencatatan Transaksi Barang

WHO SHOULD ATTEND THIS TRAINING?

Logistics /supply chain Manager, Purchasing manager, Warehousing manager, Distribution Manager, Logistics Planner, Production manager, Production Planner, Marketing Manager dan semua posisi yang erat kaitannya dengan manajemen logistik serta siapa saja yang ingin mengetahui perkembangan terakhir Logistics and Supply Chain Management.

INSTRUKTUR : Ir. Asep Saefulbachri, MBA.,MM.

TEMPAT TRAINING : Hotel Golden Flower Bandung

DURASI TRAINING : 4 days

WAKTU TRAINING : 18 - 21 Oktober 2010

HARGA INVESTASI/PESERTA :

1. Rp 7.250.000/peserta (bayar penuh) atau

2. Rp 7.000.000/peserta (early bird, yang membayar sebelum 11 Oktober 2010) atau

3. Rp 6.750.000/peserta (peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

FASILITAS UNTUK PESERTA :

1. Training Module

2. Training CD Contains Training Material

3. Certificate

4. Stationeries: NoteBook and Ballpoint

5. Jacket or Waistcoat or T-Shirt

6. Bag or Backpackers

7. Training Photo

8. Training Room with Full AC Facilities and multimedia

9. Once lunch and twice coffeebreak every day of training

10. Qualified and experienced instructor

11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

“INSTRUKTUR TRAINING”

Ir. Asep Saefulbachri, MBA.,MM. adalah lulusan Sarjana Teknik dan Manajemen Industri Institut Teknologi Bandung (ITB). Pendidikan MBA beliau tempuh dari Asian Institute of Management Manila serta Magister Management dari sekolah Tinggi Manajemen Bandung (STMB Telkom). Beliau juga mengikuti pendidikan singkat lainnya di Arizona State university USA, ATI-Edmonto, Canada, dan Siemens-Munich West Germany. Pengalaman profesional beliau lebih dari 25 tahun, antaranya di Direktorat Logistik PT Telkom (1981 - 1993), Manajer Pengembangan usaha PT Bangtelindo Bandung (1996 - 1997), Managing Director Forum Eksekutif Indonesia, Bandung, Course Director Strategic Forum Expertise Sdn Bhd Kuala Lumpur, Malaysia (sejak 1995), Dosen tetap dibeberapa perguruan tinggi untuk program S1 Jurusan Teknologi Industri (sejak 1993) dan program pasca sarjana (S2) Teknik & Manajemen Industri (sejak 1992). Beliau telah mengajar banyak kelas training untuk perusahaan-perusahaan di Indonesia dengan topik-topik yang berkaitan dengan keahlian beliau seperti Operation Management, Purchashing, Production, Logistic & Supply Chain Management, Business & Financial Management, dan lain - lain.

INFORMASI TRAINING KE:

PT.MAIRODI MANDIRI SEJAHTERA (MMS)
Telp/Fax: (022) 7814149

SMS Center : 081322050262 atau 085860263043

Email : training@mairodi-training.com atau ptmmsbdg@gmail.com atau ptmmsbdg@yahoo.com atau ptmmsbdg.marketing@gmail.com

Website : http://mairodi-training.com

Contact Person : Yanti Deris Sutanty, Lita Permatasari, Dini Ratna Puri,

Rike Maryani

FLUID FLOW – GAS METERING AND CUSTODY TRANSFER

admin — Wed, 18 Aug 2010 02:37:43 +0000

Date	:	11 - 15 October 2010
Duration	:	5 Days
Venue	:	Bandung(Hotel Golden Flower)
Investation Fee	:	IDR 7.950.000

REGISTER ONLINE NOW

Training Syllabus:

“FLUID FLOW - GAS METERING AND CUSTODY TRANSFER”

TRAINING OBJECTIVE :

This course is developed for engineers and technicians who need to have a practical knowledge of selection, installation and commissioning of fiscal metering equipment. It is for those primarily involved in achieving effective results in industrial processes. This would involve the design, specification and implementation of control and measurement equipment. The course focuses on practical applications, with special attention to installation considerations and application limitations when selecting or installing different measurement or control instruments for fiscal metering.

TRAINING MATERIAL OUTLINE :

1. Basic Fluid Flow:

a. Fluid property

Ø Density

Ø Viscosity

Ø Surface tension

Ø Modulus elasticity

b. Compressible & Incompressible flow

c. Fluid Flow

Ø Continuity Equation

Ø Bernoulli Equation

d. Pipe fluid flow

e. Fluid Flow Measurement

2. Performance Characteristic of Flowmeter

a. Accuracy

b. Repeatability

c. Performance Measure

d. Calculation

3. Head Flow Meter

a. Orifice

b. Sizing

c. Secondary Instrument

d. Calculation

e. Standard AGA3

4. Turbine Meter

a. Systems

b. Properties

c. Characteristics

d. Standard AGA7

5. Ultrasonic Flowmeter

a. Ultrasonic Flowmeter

b. Types

c. Application

d. Standard AGA9

6. Oil Transfer Meter:

a. Meter Run

b. Proving Skid

c. Meter Proving

d. Meter Factor

e. Base Prover

f. Proving Run

g. Prover Pass

h. Prover Round Trip

i. Proving Counter

7. Shipping Calculate Volume & Calculate Correction:

a. Temperature material

b. Pressure material

c. Oil Temperature

d. Oil Pressure

e. Sediments and water

f. Calculate Meter Factor

8. Retroactive Meter Factor

a. Manual retroactive factor

9. Calculation Sample:

a. Flow calculation

b. Oil Quantity measurement

10. Use Measurement Systems in MIGAS Activities

WHO SHOULD ATTEND THIS TRAINING?

Ø Instrumentation Engineers & technicians

Ø Design & Process Engineers

Ø Operation Engineer

Ø Well testing group

Ø Production Operation

Ø Reservoir Engineering & technicians

Ø Maintenance Superintendent & Supervisor

VENUE : Hotel Golden Flower Bandung

INSTRUCTOR : Dr. Ir. Endra Joelianto

TRAINING DURATION : 5 days

TRAINING TIME : 11 - 15 October 2010

INVESTATION PRICE/PERSON :

1. Rp 7.950.000/person (full fare) or

2. Rp 7.750.000/person (early bird, payment before 4 October 2010) or

3. Rp 7.500.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

1. Training Module

2. Training CD Contains Training Material

3. Certificate

4. Stationeries: NoteBook and Ballpoint

5. Jacket or Waistcoat or T-Shirt

6. Bag or Backpackers

7. Training Photo

8. Training Room with Full AC Facilities and multimedia

9. Once lunch and twice coffeebreak every day of training

10. Qualified instructor

11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

“TRAINING INSTRUCTOR”

Dr. Ir. Endra Joelianto is an expert in control engineering. His outstanding research is: Hybrid Control Systems, Discrete Event Control Systems, Petri Nets Analysis and Application on PLC, Robust PID Controller, Advanced Process Control, Industrial Automation using PLC/DCS. He received first degree (Ir.) in Engineering Physics in 1990 from Department of Engineering Physics, ITB and Doctor of Philosophy (PhD.) in Control Engineering in 2001 from Department of Engineering,The Australian National University, Australia.
He is coordinator of Intelligent Control and Automation, and founder of PLC Research Group, Laboratorium Instrumentasi dan Kontrol (LINK), Departemen Teknik Fisika, Institut Teknologi Bandung. He was the founder and the director of Schneider-OMRON PLC Training Center, Maranatha Christian University, Bandung. The Schneider-OMRON PLC Training Center has cooperation with PT. Schneider Electric Indonesia, PT. OMRON Corporation Japan, Invensys WONDERWARE. He was the project leader for TPSDP Retooling Program Batch II-DIKNAS for Training Program on “INDUSTRIAL AUTOMATION USING PLC” 2004 and Co-provider for the same retooling program Batch II on “INDUSTRIAL CONTROL AND AUTOMATION” by PT. Cahaya Sumirat, Bandung. In 2005, he leads the retooling project entitled PLC for Industrial Control and Automation at the Department of Engineering Physics, ITB
He attended several professional trainings on PLC, DCS and Instruments Calibration, such as: Yokogawa DCS, Bandung (2000), Implementation of Indonesian National Standard (SNI) 19-17025 and Basic Calibration, Yokogawa Electric Corporation, Bandung (2001), Fieldbus Foundation Technology, Singapore (2002), Basic and Advance PLC OMRON, Jakarta (2004), Cleaner Production: Application in Industries, University of Kwazulu-Natal, South Africa-ITB, Bandung (2005). Advanced Process Control, ASPEN Tech., Jakarta, (2005)
He serves as instructor either for public, universities or in-house training on instrumentation and process control to universities, petrochemical or oil and gas companies, such as: PT. NGL Arun, PT. NGL Bontang, PT. Pupuk Iskandar Muda, PT. Pupuk Kalimantan Timur, PT. Pupuk Kujang, PT. Semen Padang, PT. Semen Gresik, PT. Petrokimia Gresik, PT. Semen Cibinong, PT. Indocement, PT. Semen Tigaroda Perkasa, PT. Exspan Nusantara, PT. ALSTOM Indonesia, PERTAMINA, British Petroleoum, Maxus, Amoseas, PT. Nusa Halmahera Mineral, PT. Indonesia Jaya Power, Indonesia Power-Paiton, PT. Riau Pulp and Paper, Indonesian Cement and Concrete Institut (ISBI), LIPI-Bandung, LAPI-ITB, POLMAN-Bandung, etc.

INFORMASI TRAINING KE:

PT.MAIRODI MANDIRI SEJAHTERA (MMS)
Telp/Fax: (022) 7814149

SMS Center : 081322050262 atau 085860263043

Email : training@mairodi-training.com atau ptmmsbdg@gmail.com atau ptmmsbdg@yahoo.com atau ptmmsbdg.marketing@gmail.com

Website : http://mairodi-training.com

Contact Person : Yanti Deris Sutanty, Lita Permatasari, Dini Ratna Puri,

Rike Maryani